Request for OSX commandline option testing

[LordHavoc]

Could you look at this, LordHavoc, if you haven't already? Are they claiming they support all the OpenGL things that don't work? or are they aware of it and just not fixing it.

They're not aware of it.

There are three bugs I know of:

• ftransform() does not always match the fixed function transforms. (Non-compliant with GLSL spec)
  Quoting the GLSL specification:
  

  Code: Select all

  vec4 ftransform()
For vertex shaders only. This function will ensure that
the incoming vertex value will be transformed in a way
that produces exactly the same result as would be
produced by OpenGL’s fixed functionality transform. It
is intended to be used to compute gl_Position, e.g.,
gl_Position = ftransform()
This function should be used, for example, when an
application is rendering the same geometry in separate
passes, and one pass uses the fixed functionality path to
render and another pass uses programmable shaders.


• GL_ARB_texture_non_power_of_two crashes or shows incorrect textures when using fallbacks. (fallbacks are supposed to be slow, not crash or show incorrect graphics) This issue does not substantially affect Nexuiz, as fallbacks are too slow to use regardless of correctness, but it is a case of non-compliance with the GL specifications.
• GL_ARB_shader_objects fails to respond to glLoadMatrixd while the GL_TEXTURE matrix mode is active, in some circumstances involving glUseProgramObjectARB. (I need to exactly identify what circumstances this happens in, so I need to have Willis run some more tests)

I have not filed bug reports on any of these three issues yet, because I need to make a test case for the texture matrix problem to demonstrate it clearly..

[AceOfThumbs]

With the Feb 27th SVN, my MacPro/ATI x1900 is getting good frame rates even on maps that usually slowed it way down and even with several players onscreen. Also, Open GL 2 seems to work well most of the time now.

With GL 2, I get about 200-500 fps. In the rare cases that my HUD graphics start to spin, I switch off GL 2 and Vertex Buffer Objects and get about 100-300 fps.

This is verrry nice and much appreciated!!

[LordHavoc]

With GL 2, I get about 200-500 fps. In the rare cases that my HUD graphics start to spin, I switch off GL 2 and Vertex Buffer Objects and get about 100-300 fps.

It's very strange that the spinning hud now also affects models on OSX, now that I use exclusively GL 2.0 shader rendering when GLSL is enabled - I had expected that to work around the problems, not cause more

I still have not filed a bug report on this because I simply don't understand the bug at work.

[AceOfThumbs]

It's very strange that the spinning hud now also affects models on OSX

I don't know what you mean about affecting models. For me, it is just the 2D HUD that spins and only when I have GL 2 on.

[AceOfThumbs]

Nexuiz 2.4 Mac Pro ATI x1900

With the new 2.4 version, in situations where I used to get the spinning HUD, now the HUD just disappears, which is a nicer way for it to fail.

[Willis]

Nexuiz 2.4 Mac Pro ATI x1900

With the new 2.4 version, in situations where I used to get the spinning HUD, now the HUD just disappears, which is a nicer way for it to fail.

I've noticed it seems to depend on the map. There are a few where I get spinning test, some where it will disappear and reappear randomly, and some it will work fine on. Warfare always seems to give me spinning text for example, where Strength was had the disappearing problem, and Aggressor (I think) was fine.

[AceOfThumbs]

I've noticed it seems to depend on the map. There are a few where I get spinning test, some where it will disappear and reappear randomly, and some it will work fine on. Warfare always seems to give me spinning text for example, where Strength was had the disappearing problem, and Aggressor (I think) was fine.

Right you are. I hadn't tried enough maps. I get spinning text on Warfare also. I used to get spinning on Starship, but now the text disappears instead.

[superfly]

Hi,

Running OS X 10.4, with an intel gfx card. Nexiuz 2.3 used to run fine on my system, but now when I open 2.4, I can hear the music, so Nexiuz is obviously working, but my monitor says "Input signal out of range". I tried deleting my .nexuiz directory, so that Nexuiz could load it's defaults, but that didn't help. Both the glx and sdl versions do that. I've attached the qconsole file from the glx version. This happens before i reach any menus or anything.

Hardware Overview:

Model Name: Mac mini
Model Identifier: Macmini1,1
Processor Name: Intel Core Duo
Processor Speed: 1.66 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 2 MB
Memory: 1.25 GB
Bus Speed: 667 MHz
Boot ROM Version: MM11.0055.B08
SMC Version: 1.3f4
Serial Number: VM6181L2U36

Intel GMA 950:

Chipset Model: GMA 950
Type: Display
Bus: Built-In
VRAM (Total): 64 MB of shared system memory
Vendor: Intel (0x8086)
Device ID: 0x27a2
Revision ID: 0x0003
Displays:
Display:
Resolution: 1280 x 1024 @ 60 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported

Code: Select all

====== Log started (Wed Mar 05 12:22:41 2008) ======
^7Nexuiz Mac OS X 11:18:03 Feb 29 2008
^7Trying to load library... "libz.dylib" - loaded.
^7Added packfile /Users/raoul/Applications/Nexuiz/data/common-spog.pk3 (26 files)
^7Added packfile /Users/raoul/Applications/Nexuiz/data/data20080229.pk3 (3992 files)
^7Trying to load library... "libcurl.4.dylib" "libcurl.3.dylib" - loaded.
^7Trying to load library... "libvorbis.dylib" - loaded.
^7Trying to load library... "libvorbisfile.dylib" - loaded.
^7Trying to load library... "libmodplug.dylib" - loaded.
^7Trying to load library... "OffscreenGecko.dylib" "/Users/raoul/Applications/Nexuiz/Nexuiz-dev.app/Contents/MacOS/OffscreenGecko.dylib" - failed.
^7execing quake.rc
^7execing default.cfg
^7execing physicsQBR.cfg
^7execing newhook.cfg
^7execing weapons.cfg
^7execing normal.cfg
^7couldn't exec config.cfg
^7couldn't exec data/campaign.cfg
^7couldn't exec autoexec.cfg
^7Initializing Video Mode: fullscreen 1024x768x32x60hz
^7Loading OpenGL driver /System/Library/Frameworks/AGL.framework/AGL
^7Loading OpenGL driver /System/Library/Frameworks/OpenGL.framework/OpenGL
^7GL_VENDOR: Intel Inc.
^7GL_RENDERER: Intel GMA 950 OpenGL Engine
^7GL_VERSION: 1.2 APPLE-1.4.58
^7GL_EXTENSIONS: GL_ARB_transpose_matrix GL_ARB_vertex_program GL_ARB_vertex_blend GL_ARB_window_pos GL_ARB_shader_objects GL_ARB_vertex_shader GL_EXT_multi_draw_arrays GL_EXT_clip_volume_hint GL_EXT_rescale_normal GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_gpu_program_parameters GL_APPLE_client_storage GL_APPLE_specular_vector GL_APPLE_transform_hint GL_APPLE_packed_pixels GL_APPLE_fence GL_APPLE_vertex_array_object GL_APPLE_vertex_program_evaluators GL_APPLE_element_array GL_APPLE_flush_render GL_NV_texgen_reflection GL_NV_light_max_exponent GL_IBM_rasterpos_clip GL_SGIS_generate_mipmap GL_ARB_shading_language_100 GL_ARB_texture_border_clamp GL_ARB_multitexture GL_ARB_texture_env_add GL_ARB_texture_cube_map GL_ARB_texture_env_dot3 GL_ARB_texture_env_combine GL_ARB_texture_compression GL_ARB_texture_mirrored_repeat GL_ARB_shadow GL_ARB_depth_texture GL_ARB_fragment_program GL_ARB_fragment_shader GL_ARB_point_sprite GL_ARB_texture_non_power_of_two GL_ARB_vertex_buffer_object GL_ARB_pixel_buffer_object GL_EXT_framebuffer_object GL_EXT_texture_rectangle GL_ARB_texture_rectangle GL_EXT_texture_env_add GL_EXT_blend_color GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_texture_lod_bias GL_EXT_abgr GL_EXT_bgra GL_EXT_stencil_wrap GL_EXT_texture_filter_anisotropic GL_EXT_separate_specular_color GL_EXT_secondary_color GL_EXT_blend_func_separate GL_EXT_shadow_funcs GL_EXT_stencil_two_side GL_EXT_texture_compression_s3tc GL_EXT_texture_compression_dxt1 GL_EXT_blend_equation_separate GL_EXT_packed_depth_stencil GL_APPLE_flush_buffer_range GL_APPLE_ycbcr_422 GL_APPLE_texture_range GL_APPLE_pixel_buffer GL_NV_blend_square GL_ATI_texture_env_combine3 GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod
^7AGL_EXTENSIONS:
^7checking for OpenGL 1.1.0...  enabled
^7Checking OpenGL extensions...
^7checking for glDrawRangeElements...  enabled
^7checking for GL_ARB_multitexture...  enabled
^7checking for GL_ARB_texture_env_combine...  enabled
^7checking for GL_ARB_texture_env_dot3...  enabled
^7checking for GL_EXT_texture3D...  not detected
^7checking for GL_ARB_texture_cube_map...  enabled
^7checking for GL_ARB_texture_non_power_of_two...  enabled
^7checking for GL_ARB_texture_compression...  enabled
^7checking for GL_EXT_compiled_vertex_array...  not detected
^7checking for GL_EXT_texture_edge_clamp...  not detected
^7checking for GL_SGIS_texture_edge_clamp...  enabled
^7checking for GL_EXT_texture_filter_anisotropic...  enabled
^7checking for GL_EXT_blend_minmax...  enabled
^7checking for GL_EXT_blend_subtract...  enabled
^7checking for glStencilOpSeparate...  enabled
^7checking for GL_EXT_stencil_two_side...  enabled
^7checking for GL_ARB_vertex_buffer_object...  enabled
^7checking for GL_ARB_shader_objects...  enabled
^7checking for GL_ARB_shading_language_100...  enabled
^7checking for GL_ARB_vertex_shader...  enabled
^7checking for GL_ARB_fragment_shader...  enabled
^7
^7QuakeC extensions for server and client: BX_WAL_SUPPORT DP_BUTTONCHAT DP_BUTTONUSE DP_CL_LOADSKY DP_CON_ALIASPARAMETERS DP_CON_BESTWEAPON DP_CON_EXPANDCVAR DP_CON_SET DP_CON_SETA DP_CON_STARTMAP DP_EF_ADDITIVE DP_EF_BLUE DP_EF_DOUBLESIDED DP_EF_FLAME DP_EF_FULLBRIGHT DP_EF_NODEPTHTEST DP_EF_NODRAW DP_EF_NOGUNBOB DP_EF_NOSHADOW DP_EF_RED DP_EF_STARDUST DP_ENT_ALPHA DP_ENT_COLORMOD DP_ENT_CUSTOMCOLORMAP DP_ENT_EXTERIORMODELTOCLIENT DP_ENT_GLOW DP_ENT_LOWPRECISION DP_ENT_SCALE DP_ENT_VIEWMODEL DP_GECKO_SUPPORT DP_GFX_EXTERNALTEXTURES DP_GFX_EXTERNALTEXTURES_PERMAP DP_GFX_FOG DP_GFX_QUAKE3MODELTAGS DP_GFX_SKINFILES DP_GFX_SKYBOX DP_HALFLIFE_MAP DP_HALFLIFE_MAP_CVAR DP_HALFLIFE_SPRITE DP_INPUTBUTTONS DP_LITSPRITES DP_LITSUPPORT DP_MONSTERWALK DP_MOVETYPEBOUNCEMISSILE DP_MOVETYPEFOLLOW DP_QC_ASINACOSATANATAN2TAN DP_QC_CHANGEPITCH DP_QC_CMD DP_QC_COPYENTITY DP_QC_CRC16 DP_QC_CVAR_DEFSTRING DP_QC_CVAR_STRING DP_QC_CVAR_TYPE DP_QC_EDICT_NUM DP_QC_ETOS DP_QC_FINDCHAIN DP_QC_FINDCHAINFLAGS DP_QC_FINDCHAINFLOAT DP_QC_FINDFLAGS DP_QC_FINDFLOAT DP_QC_FS_SEARCH DP_QC_GETLIGHT DP_QC_GETSURFACE DP_QC_GETSURFACEPOINTATTRIBUTE DP_QC_GETTAGINFO DP_QC_MINMAXBOUND DP_QC_MULTIPLETEMPSTRINGS DP_QC_NUM_FOR_EDICT DP_QC_RANDOMVEC DP_QC_SINCOSSQRTPOW DP_QC_STRFTIME DP_QC_STRINGBUFFERS DP_QC_STRINGCOLORFUNCTIONS DP_QC_STRING_CASE_FUNCTIONS DP_QC_STRREPLACE DP_QC_TOKENIZEBYSEPARATOR DP_QC_TRACEBOX DP_QC_TRACETOSS DP_QC_TRACE_MOVETYPE_HITMODEL DP_QC_TRACE_MOVETYPE_WORLDONLY DP_QC_UNLIMITEDTEMPSTRINGS DP_QC_URI_ESCAPE DP_QC_VECTOANGLES_WITH_ROLL DP_QC_VECTORVECTORS DP_QUAKE2_MODEL DP_QUAKE2_SPRITE DP_QUAKE3_MAP DP_QUAKE3_MODEL DP_REGISTERCVAR DP_SND_DIRECTIONLESSATTNNONE DP_SND_FAKETRACKS DP_SND_OGGVORBIS DP_SND_STEREOWAV DP_SOLIDCORPSE DP_SPRITE32 DP_SV_BOTCLIENT DP_SV_CLIENTCOLORS DP_SV_CLIENTNAME DP_SV_CMD DP_SV_CUSTOMIZEENTITYFORCLIENT DP_SV_DRAWONLYTOCLIENT DP_SV_DROPCLIENT DP_SV_EFFECT DP_SV_ENTITYCONTENTSTRANSITION DP_SV_MODELFLAGS_AS_EFFECTS DP_SV_NETADDRESS DP_SV_NODRAWTOCLIENT DP_SV_ONENTITYNOSPAWNFUNCTION DP_SV_PING DP_SV_PLAYERPHYSICS DP_SV_POINTPARTICLES DP_SV_POINTSOUND DP_SV_PRECACHEANYTIME DP_SV_PRINT DP_SV_PUNCHVECTOR DP_SV_ROTATINGBMODEL DP_SV_SETCOLOR DP_SV_SHUTDOWN DP_SV_SLOWMO DP_SV_WRITEUNTERMINATEDSTRING DP_TE_BLOOD DP_TE_BLOODSHOWER DP_TE_CUSTOMFLASH DP_TE_EXPLOSIONRGB DP_TE_FLAMEJET DP_TE_PARTICLECUBE DP_TE_PARTICLERAIN DP_TE_PARTICLESNOW DP_TE_PLASMABURN DP_TE_QUADEFFECTS1 DP_TE_SMALLFLASH DP_TE_SPARK DP_TE_STANDARDEFFECTBUILTINS DP_TRACE_HITCONTENTSMASK_SURFACEINFO DP_VIEWZOOM EXT_BITSHIFT FRIK_FILE FTE_STRINGS KRIMZON_SV_PARSECLIENTCOMMAND NEH_CMD_PLAY2 NEH_RESTOREGAME NEXUIZ_PLAYERMODEL NXQ_GFX_LETTERBOX PRYDON_CLIENTCURSOR TENEBRAE_GFX_DLIGHTS TW_SV_STEPCONTROL
^7QuakeC extensions for menu: BX_WAL_SUPPORT DP_CINEMATIC_DPV DP_FONT_VARIABLEWIDTH DP_GECKO_SUPPORT DP_MENU_EXTRESPONSEPACKET DP_QC_ASINACOSATANATAN2TAN DP_QC_CMD DP_QC_CRC16 DP_QC_CVAR_TYPE DP_QC_RENDER_SCENE DP_QC_STRFTIME DP_QC_STRINGBUFFERS DP_QC_STRINGCOLORFUNCTIONS DP_QC_STRING_CASE_FUNCTIONS DP_QC_STRREPLACE DP_QC_TOKENIZEBYSEPARATOR DP_QC_UNLIMITEDTEMPSTRINGS DP_QC_URI_ESCAPE FTE_STRINGS
^7Couldn't load gfx/palette.lmp, falling back on internal palette
^7GL_MAX_ELEMENTS_VERTICES = 2048
^7GL_MAX_ELEMENTS_INDICES = 150000
^7GLSL shader support detected: texture units = 8 texenv, 16 image, 8 array
^7OpenGL backend started.
^7Trying to load library... "libjpeg.62.dylib" - loaded.
^7Trying to load library... "libpng12.0.dylib" - loaded.
^7GLSL shader glsl/default.glsl generic diffuse compiled.
^7Draw_CachePic: failed to load gfx/complete
^7Draw_CachePic: failed to load gfx/inter
^7scripts/common.shader parsing warning: unknown surfaceparm "skip"
^7Shader 'textures/Reaptxt/sun' already defined
^7S_Startup: initializing sound output format: 48000Hz, 16 bit, 2 channels...
^7Initializing CoreAudio...
^7   Chunk size = 1024 sample frames
^7   Hardware format:
^7    44100 mSampleRate
^7     lpcm mFormatID
^7        8 mBytesPerPacket
^7        1 mFramesPerPacket
^7        8 mBytesPerFrame
^7        2 mChannelsPerFrame
^7       32 mBitsPerChannel
^7S_Startup: sound output initialization FAILED
^7           Driver has suggested 44100Hz, 16 bit, 2 channels. Retrying...
^7S_Startup: initializing sound output format: 44100Hz, 16 bit, 2 channels...
^7Initializing CoreAudio...
^7   Chunk size = 1024 sample frames
^7   Hardware format:
^7    44100 mSampleRate
^7     lpcm mFormatID
^7        8 mBytesPerPacket
^7        1 mFramesPerPacket
^7        8 mBytesPerFrame
^7        2 mChannelsPerFrame
^7       32 mBitsPerChannel
^7   Initialization successful
^7Sound format: 44100Hz, 2 channels, 16 bits per sample
^7CDAudio_Init: No CD in player.
^7Can't get initial CD volume
^7CD Audio Initialized
^7menu programs occupy 473K.
^7========Initialized=========
^7Client using an automatically assigned port
^7Client opened a socket on address local:2
^7Client opened a socket on address 0.0.0.0:49628
^7Map farewell provides unknown info item author_email, ignored
^7Map farewell provides unknown info item author_www, ignored
^7Map warfare provides unknown info item author_email, ignored
^7Map warfare provides unknown info item author_www, ignored
^7Attempted division by zero in menu
^7Attempted division by zero in menu
^7Attempted division by zero in menu
^7Attempted division by zero in menu
^7ln: 5 iterations
^7GLSL shader glsl/default.glsl generic compiled.
^7previous mouse acceleration: 2.000000
^7Sending extended response requests...
^7Fake CD track 1 playing...
^7Received extended response packet from 64.22.107.122:27950


[esteel]

That would mean a resolution/frequency combo is selected that your monitor is unable to display.. I just wonder why 2.4 would work any other way then 2.3 in that regard.

can you try to add
vid_refreshrate 60
to your ~/.nexuiz/data/config.cfg or change the line if its already there? Or choose a frequency you know your system can handle?

[superfly]

Hmm.... I don't have that config file. I just added it, and it doesn't help.

I checked my monitor's configuration, and it's currently set to 1280x1024 @ 60Hz, so setting the refresh rate to 60 technically should help.

Unfortunately, since I don't have a config file, I don't know what options to put in there

I'll do some more googing...