Development build CRASHES (sdl works)

[ihsan]

Nexuiz 2.23 crashes my XP system every time I use offset mapping (1.5 did not) now the nexuiz20080227a build crashes. The SDL version works. It's noticeably faster.

Following is a CPUZ report on my PC and my Videocard is an ATI All-in-wonder 9600.

CPU-Z Report
CPU-Z version 1.32.1.

CPU(s)
Number of CPUs 1
Name AMD Duron
Code Name Spitfire
Specification AMD Duron(tm) processor
Family / Model / Stepping 6 3 1
Extended Family / Model 7 3
Package Socket A
Technology 0.18 um
Supported Instructions Sets MMX, Extended MMX, 3DNow!, Extended 3DNow!
CPU Clock Speed 800.0 MHz
Clock multiplier x 8.0
Front Side Bus Frequency 100.0 MHz
Bus Speed 200.0 MHz
L1 Data Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L1 Instruction Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L2 Cache 64 KBytes, 16-way set associative, 64 Bytes line size
L2 Speed 800.0 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic no
L2 Bus Width 64 bits

Mainboard and chipset
Motherboard manufacturer MICRO-STAR INTERNATIONAL CO., LTD
Motherboard model MS-6738,
BIOS vendor Phoenix Technologies, LTD
BIOS revision 6.00 PG
BIOS release date 04/18/2003
Chipset VIA P4M266/KM266 (VT8375) rev. 00
Southbridge VIA VT8235 rev. 00
Sensor chip Winbond W83697HF
Graphic Interface AGP
AGP Status enabled, rev. 2.0
AGP Data Transfer Rate 4x
AGP Max Rate 4x
AGP Side Band Addressing supported, enabled

Memory
DRAM Type DDR-SDRAM
DRAM Size 1024 MBytes
DRAM Frequency 133.3 MHz
FSB:DRAM FSB + 33 MHz
DRAM Interleave 4-way
CAS# Latency 2.0 clocks
RAS# to CAS# 3 clocks
RAS# Precharge 3 clocks
Cycle Time (TRAS) 6 clocks
# of memory modules 2
Module 0 DDR-SDRAM PC3200 - 512 MBytes
Module 1 DDR-SDRAM PC3200 - 512 MBytes

Software
Windows version Microsoft Windows XP Professional Service Pack 1 (Build 2600)
DirectX version 9.0c

[Blµb]

Are you saying that the SDL version works WITH offsetmapping for you?
Now THAT'S new

[Urmel]

I am a little astonished my friend. Why are you using 2.23 at all?

[ihsan]

Let me clarify:
Nex 1.5 basically never crashed (offset or no)
By Nex 2.3 enabling offset caused a crash
SVN Ver 20080227a now crashes even before the transparent Logo/Lading screen appears, my pc computer only switches resolutions then crashes.
All this is for nexuiz.exe

nexuiz-sdl.exe works in the SVN ver for me (thank god!) but offset mapping still is an instant crash.

Windows error details:
AppName: nexuiz.exe AppVer: 1.0.0.0 ModName: msvcrt.dll
ModVer: 7.0.2600.1106 Offset: 00033bce

[dread]

lol
i got the same problem with the new nexuiz(2.4) and an version form 25.2^^
the normal nexuiz.exe doesnt't work but the nexuiz-sdl works^^

Windows error message:
aborted application nexuiz.exe, Version 1.0.0.0,
aborted modulel msvcrt.dll, Version 7.0.2600.2180, bug address 0x00037c7e.

[dIM]

same here
Dr. watson says: http://rafb.net/p/HUpGH412.html

[SavageX]

Just tried Nexuiz 2.4 on Windows XP and a Radeon HD 3850 card. Both nexuiz.exe and nexuiz-sdl.exe work fine for me.

[morfar]

I tested on mine and my brothers computer and it worked....

But some say it crashes...

[divVerent]

We need a backtrace of the crash, to find out what is the cause. Like, Dr. Watson's full output.

Or, you get OllyDbg, set it as primary debugger, click "Debug" when it crashed, and post a screenshot of the maximized OllyDbg window after the crash. It should also contain all the useful info.

[dread]

ok..
i downloaded OllyDbg
started it.. where/how can i set it as primary debugger?

what ive already done is file- open- nexuiz.exe - then the window get filled with a lot of text xD
but i dont know what to do with that^^

so pls say me what to do exactly..