No network

If you've had any problems with Nexuiz, or would like to report bugs, post here.

Moderators: Nexuiz Moderators, Moderators

Sat Nov 21, 2009 7:52 pm

  • Hi, I am running Ubuntu 9.10 64-bit desktop.

    My internet connection is via WiFi from a free hotspot. I know that the hotspot is blocking all ports except common network services. For sure P2P is blocked, and I can't play anythng online also. Maybe WiFi performance is too low to play this seriously, but... eh... :oops:

    This is what Nexuiz console shows me about my network:
    Code: Select all
    Unable to query master servers, no suitable network sockets active.
    No network
    Client using an automatically assigned port
    Client opened a socket on address local:2
    Client opened a socket on address 0.0.0.0:0
    Client opened a socket on address [0:0:0:0:0:0:0:0]:0


    Anybody have any idea if it is possible for me to play Nexuiz online?

    EDIT:

    I've found out that I can override blocked ports with a proxy bypass (http://www.bypassthat.com), I wonder if game could use the same :P
    User avatar
    unfa
    Member
     
    Posts: 30
    Joined: Mon Jan 19, 2009 11:41 am
    Location: Warsaw, Poland

Fri Nov 27, 2009 12:55 pm

  • the error message you have means that you dont have an IP adress on the interface that nexuiz is using. If you say you can access the internet, it looks like if nexuiz was trying to use your wired interface instead of your wifi one. maybe you can post the output of
    Code: Select all
    ifconfig

    It would help knowing more about your networking setup.
    User avatar
    liolak
    Alien
     
    Posts: 114
    Joined: Fri Jan 25, 2008 12:16 am
    Location: Montréal, Canada

Sat Nov 28, 2009 8:51 pm

  • Code: Select all
    unfa@unfa-desktop:~$ ifconfig
    eth0      Link encap:Ethernet  HWaddr 00:26:18:23:0a:60 
              UP BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
              Interrupt:28 Base address:0xc000

    lo        Link encap:Local Loopback 
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:4494 errors:0 dropped:0 overruns:0 frame:0
              TX packets:4494 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:130774 (130.7 KB)  TX bytes:130774 (130.7 KB)

    wlan0     Link encap:Ethernet  HWaddr 00:4f:6a:04:24:81 
              inet addr:172.20.0.238  Bcast:172.20.255.255  Mask:255.255.0.0
              inet6 addr: fe80::24f:6aff:fe04:2481/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:98457 errors:0 dropped:0 overruns:0 frame:0
              TX packets:44382 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:49199022 (49.1 MB)  TX bytes:7931600 (7.9 MB)

    wmaster0  Link encap:UNSPEC  HWaddr 00-4F-6A-04-24-81-00-00-00-00-00-00-00-00-00-00 
              UP RUNNING  MTU:0  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
    User avatar
    unfa
    Member
     
    Posts: 30
    Joined: Mon Jan 19, 2009 11:41 am
    Location: Warsaw, Poland

Sat Nov 28, 2009 9:15 pm

  • oh well, what i said in my previous post was wrong. I checked what nexuiz gives for network for me when starting up and its also adress 0.0.0.0 except mine is fallowed by :27960 which is the port i want it to use.

    If your connection is restricted on ports that you can use, there is that command
    Code: Select all
    cl_port "whatevernumber"

    that can force a given source port for nexuiz.

    you could maybe try to fool your isp by setting nexuiz to use port 53 (dns). Unfortunately, If your isp use destination port to filter, that wont help :/
    in that case, maybe you can try with the proxy service you mentioned already, to forward udp connection with destination port #53 to the incoming port# of the nexuiz server you wish to connect to. but since not all nexuiz server uses the same default port# 26000, it could be very cumbersome.

    hope it helps a little :/
    User avatar
    liolak
    Alien
     
    Posts: 114
    Joined: Fri Jan 25, 2008 12:16 am
    Location: Montréal, Canada

Sat Nov 28, 2009 10:06 pm

  • I used it. I found some free ports and tried the 53-rd, but my server list is still empty :P
    I see in console that Nexuiz at startup used given port and no more "No network" messsage.
    I tried random numbers like 9999, 2000 etc, some of them were free, but when I used them again (after Nexuiz restart) the were occupied. 53-rd acted like that.
    User avatar
    unfa
    Member
     
    Posts: 30
    Joined: Mon Jan 19, 2009 11:41 am
    Location: Warsaw, Poland

Sat Nov 28, 2009 10:38 pm

  • what do you mean by free and occupied ?

    as for the server list population, im pretty sure it does not use the same port. its probably a tcp connection to some master server. I dont know much about that, maybe someone can provide more information regarding this. or a forum search might give some idea on how to allow it in your setup.
    User avatar
    liolak
    Alien
     
    Posts: 114
    Joined: Fri Jan 25, 2008 12:16 am
    Location: Montréal, Canada

Sat Nov 28, 2009 11:21 pm

  • Using a proxy is pretty much out of question, as that will be very unplayable due to massive pings.
    Image
    User avatar
    FruitieX
    Keyboard killer
     
    Posts: 588
    Joined: Mon Nov 13, 2006 4:47 pm
    Location: Finland

Sun Nov 29, 2009 12:22 am

  • ^ xD good point
    User avatar
    liolak
    Alien
     
    Posts: 114
    Joined: Fri Jan 25, 2008 12:16 am
    Location: Montréal, Canada

Sun Nov 29, 2009 1:55 pm

  • I mean a port is free when Nexuiz can use it (it's not occupied/used by other application). That doesn't mean that the port is open, cos my public hotspot may be blocking it anyway.

    BTW: thanks for trying to help, guys :)
    User avatar
    unfa
    Member
     
    Posts: 30
    Joined: Mon Jan 19, 2009 11:41 am
    Location: Warsaw, Poland

Sun Jan 03, 2010 7:16 pm

  • I have comodo. i just installed nexuiz and comodo asked me what to do about it trying to talk to the internet. nexuiz has all the permission and tries to send UDP but stops.

    BUT the server section in Nexuiz is dimmed, and I cant even select it.

    I tried turning off comodo, and for some reason i still can't see multiplayer. Nexuiz is set as a trusted application anyway.
    what's going wrong?

    nexuiz tries sending UDP to the server, but it gives up trying after a few seconds.
    fraggot
    Member
     
    Posts: 11
    Joined: Wed Dec 30, 2009 6:48 pm

Sun Jan 03, 2010 11:29 pm

  • @fraggot:

    Can you connect directly to a server wihout passing by the server list ?

    this page will give the ips and port number of all the public server
    http://delight.vapor.com/serverlist.php?allg=1

    The connect command is "connect" fallowed by the Ip:Port# of the server that you want to join.

    This way of joining servers is certainly not as usefull as the server list, but its a good way to isolate where your problem come from and you can also still play :)
    User avatar
    liolak
    Alien
     
    Posts: 114
    Joined: Fri Jan 25, 2008 12:16 am
    Location: Montréal, Canada

Thu Mar 11, 2010 9:45 am

  • Its excellent works to installed Ubuntu 9.10 64-bit operating system because its really high speed operating system than other's.
    If you have facing internet problem then first off check out internet speed .If speed will not appropriate then Ubuntu 9.10 64-bit operating system
    will not give you output of internet.
    cavinsmither
    Newbie
     
    Posts: 3
    Joined: Thu Feb 25, 2010 5:53 am



Return to Nexuiz - Support / Bugs




Information
  • Who is online
  • Users browsing this forum: No registered users and 1 guest